ECU Masters Advanced Display Unit
The ECU Master ADU5 and ADU7 are a choice of digital racing dash fuelled by market demand for a digital display with the capability to log information while remaining a cost effective solution. A product with vast features, customizability and high quality was the target for this product and it exceeds even the highest expectations!
Produced alongside professional drivers and engineers the ADU5 and ADU7 was produced by the drivers, for the drivers. Displaying all of the need to know information on a easy to read screen for convenience, comfort and safety in the most extreme vehicles.
Both the ADU5 and the ADU7 boast huge features including:
- High resolution
- Anti-glare screen
- Pre-configured pages
- Customizable display pages
- Troubleshooting
- Automatic or manual page changing
- Gauges, Icons and text that can be modified in real time
- User friendly windows based software
- Page overlay system
- Multiple page display independent of actual page
The ADU also comes with 15 ultra-bright RGB LEDs enabling the use of advanced gear-dependant shift lighting as well as user-defined logic for alarms, fuel level and more!
With the use of Infer Red beacons or a global positioning system, The ADU then becomes an pin point accurate lap timer which includes a predicative lap timing function which is automatically updated using your best reference laps.
The user can configure adjustable timers for functions such as pit stops or being flagged from the track. The ADU digital dash also has on-board support for thermal imagery to allow drivers to monitor brake and/or tyre temperatures (upto 16 points per corner)
The ADUs communication capabilities come in the form of two built-in, independent CAN-BUS communication ports. CAN templates are provided for most popular ECUs, and are fully configurable, allowing you to connect our hardware to virtually any engine management system.
To guarantee faultless operation the racing dash uses a 32-bit automotive controller married with a state of the art graphics processor as its building block, This pairing combined with ECU Masters Know-how means the ADU digital dash are perfect for any engineer or driver and guarantees anti-aliased, high-quality graphics at 50 frames per second. Additional data analysis and Data channels can be logged using a USB flash drive with up to 500Hz frequency.
A rugged, Specially CNC, Custom machined, Black anodized enclosure houses all of these magnificent features to ensure the longevity of the hardware
Supported ECUs
- Ecumaster EMU CLASSIC serial
- Ecumaster EMU CLASSIC CAN
- Ecumaster EMU BLACK
- AEM
- Autronic SM-4
- DTA Fast S series
- Ecumaster PMU
- EMERALD K3/K6
- Emtron
- EVO X
- Haltech Elite
- Hondata Kpro4 (Serial)
- Hondata Kpro4 (CAN)
- Life Racing
- LINK ECU
- MaxxECU
- Megasquirt 2 & 3
- MoTeC M400,M600, M800
- MoTeC M1
- Pectel SQ-6
- Syvecs
- VI-PEC
- OBD 2 over CAN ecus
- Any ECU able to send data over CAN BUS
SPECIFICATION
GENERAL |
|
| Temperature range | AECQ100 GRADE3 (-40 to +85˚C) |
| Reverse battery protection | Yes, internal |
| Operating voltage | 6-22V, immunity to transients according to ISO 7637 |
| Enclosure | IP 60, custom CNC machined aluminum |
| Connectors | 1 x 35 positions, AMP Automotive connector |
| PC communication | CAN BUS – Ecumaster interface, Peak or Kvaser |
| Display Type | TFT 800×480 |
| Brightness of display | 5″ – 600 cd/m2, 7″ – 1000 cd/m2 |
INPUTS / OUTPUTS |
|
| Analogue inputs | 8 inputs, 10 bits, 0-5 V, software controlled pull-up/pull-down 10K resistor. Al analog inputs can be used as a switches |
| Digital inputs | 8 digital inputs, software controlled input sensitivity (VR, Hall), software controlled 4K7 pull-up resistors, used for engine speed sensors, Flex Fuel, wheel speeds, turbocharger shaft speed. All digital inputs can be used as switches |
| Outputs | 2 low side outputs (switch to ground), up to 2A, 1 analogue output (0-5V) 10 bits |
| +5V Output | Monitored 5V output for powering external sensors |
COMMUNICATION |
|
| CAN Interface | 2 x CAN2.0 A/B, 250, 500, 1000 Kbps |
| CAN streams | User-defined |
| Serial communication | RS232 Rx/Tx, AiM protocols, Ecumaster, Hondata Kpro, Autronic |
| USB | Used for logging to external USB memory |
OTHERS |
|
| Light Emitting Diodes | 15 ultra bright RGB LEDs |
| Accelerometer/gyroscope | 3D accelerometer + 3D gyroscope for the analysis of vehicle dynamics |
| Real-time clock | Yes, battery powered |
| Light sensor | Yes, for automatic correction of brightness |
| Temperature sensor | Yes, for monitoring device temperature |